The Heavy Duty Impulse Foot Sealer is the product to go for when you need a professional, high quality packaging solution that can be used to ease and speed up the production line work. This foot sealer is all-inclusive of the essential components so you do not have to buy them separately. With this sealer, you can experience both convenience and efficiency.
This sealer is fitted with a foot pedal to feed the machine
If you are looking for high quality packaging products, they don’t come much better than the heavy duty Impulse Foot Sealers provided by us. They have been manufactured specifically to enhance sealing production and come with a foot pedal, which means that users can feed the machine. This cuts down on packaging time and you also get greater convenience since it comes with an adjustable foot pedal, adjustable worktable, and pedestal stand.
The product has an option of a hot stamp printer thrown into the mix, which will allow you to print info, date, and time on your products
Unfortunately, the answer is no. A 2mm and 5mm sealer utilize two different transformers and putting a 5mm heating element on a 2mm sealer could irreparably damage your sealer. Round wires and 2mm wires, however, are interchangeable.
Impulse sealers can instant seal a variety of poly materials including but not limited to: Polyethylene, Saran, Nylon, Polyvinylchloride, Polypropylene, Pliofilm, Kel-F, Mylar, Polyflex, Polyurethane, and Polyvinyl alcohol.
The #1 most common issue is maintenance. If your sealer is not working, check to see if your element is broken and/or your PTFE adhesive has worn through. If the element comes into contact with the body of the sealer due to a worn adhesive, the element may have "shorted" and caused damage to the timer. If both elements and PTFE adhesives are good condition, we recommend taking a look at the microswitch (small unit that allows an electrical current to pass through when the arm is brought down) and the electronic timer (unit that controls the seal cycle duration.)
When you do not hear a "click click" when you bring the arm down to the base of the sealer, that is a sign that the microswitch is not activated and there is no electrical current being transferred. We suggest making some easy slight adjustments to the microswitch. Please UNPLUG the unit before making any adjustments
When the element breaks, it is time to change to a new element. If you change the element, we absolutely absolutely recommend changing the PTFE adhesive (bottom adhesive strip) found underneath the element. See our answer below for more information.
For the PTFE cover, we recommend changing the cover BEFORE it burns through. As the cover wears, you will see a discoloration where it comes into contact with the element, you may also notice that your element is sticking to the thermoplastic material you are sealing. You can maneuver the cover back and forth to allow the element to come into contact with the unused portions of the PTFE cover. For the PTFE adhesive, you must replace the bottom sealing strip whenever you change the element. The adhesive serves as a barrier between the heating element and the sealer's body. When the sealer's heating element has burned through the bottom adhesive and arc'ed on the sealer's body, the element will break as well as destroy the timer. When you replace your adhesive, make sure the adhesive is 1/4"-1/2" past the machine on both ends to prevent the heating element from coming into contact with the sealer's body.
Subscribe and receive coupon specials, updates & tips on buying great bags
We Build products to your specifications at extremely competitive prices
Need a custom packaging product in a unique style or size? Do you have a large volume
requirement? We have an entire department dedicated to locating and developing unique
products that exactly meet your most demanding packaging requirements.