[email protected]877-992-2247APlasticBag.com 4023 Trail Creek Rd. Riverside, CA 92505
Element Wire For Couble Impulse
Hover to rotate. Click to revert.
Element Wire For Couble Impulse
Element Wire for Double Impulse Sealers
We carry an extensive inventory of Element wires for Double Impulse Sealers and supply your requirements at competitive prices.
Our products are manufactured in ISO-9001 Certified facilities.
- Made in USA
- 20 Element Wires per Bag
This is the most economical way to replace worn out parts and avoid down time.Every replacement unit is pre-tested and warranted in the United States, guaranteeing efficiency dependability and longevity.
||2-3 Business Days
- Can I change 2mm seal width to 5mm?
Can I change 2mm seal width to 5mm?
Unfortunately, the answer is no. A 2mm and 5mm sealer utilize two different transformers and putting a 5mm heating element on a 2mm sealer could irreparably damage your sealer. Round wires and 2mm wires, however, are interchangeable.
- What type of material can my sealer?
What type of material can my sealer?
Impulse sealers can instant seal a variety of poly materials including but not limited to: Polyethylene, Saran, Nylon, Polyvinylchloride, Polypropylene, Pliofilm, Kel-F, Mylar, Polyflex, Polyurethane, and Polyvinyl alcohol.
- I notice that my sealer is arcing ?
I notice that my sealer is arcing ?
If you are experiencing arcing when you seal your material, most likely, you have worn out your element and PTFE adhesive and MUST replace them before you damage the timer.
- My sealer is not sealing? What do I do?
My sealer is not sealing? What do I do?
The #1 most common issue is maintenance. If your sealer is not working, check to see if your element is broken and/or your PTFE adhesive has worn through. If the element comes into contact with the body of the sealer due to a worn adhesive, the element may have "shorted" and caused damage to the timer. If both elements and PTFE adhesives are good condition, we recommend taking a look at the microswitch (small unit that allows an electrical current to pass through when the arm is brought down) and the electronic timer (unit that controls the seal cycle duration.)
- My impulse sealer is not sealing?
My impulse sealer is not sealing?
When you do not hear a "click click" when you bring the arm down to the base of the sealer, that is a sign that the microswitch is not activated and there is no electrical current being transferred. We suggest making some easy slight adjustments to the microswitch. Please UNPLUG the unit before making any adjustments
- When do I change my element (heating wir
When do I change my element (heating wir
When the element breaks, it is time to change to a new element. If you change the element, we absolutely absolutely recommend changing the PTFE adhesive (bottom adhesive strip) found underneath the element. See our answer below for more information.
- When do I change the PTFE cloth and adhe
When do I change the PTFE cloth and adhe
For the PTFE cover, we recommend changing the cover BEFORE it burns through. As the cover wears, you will see a discoloration where it comes into contact with the element, you may also notice that your element is sticking to the thermoplastic material you are sealing. You can maneuver the cover back and forth to allow the element to come into contact with the unused portions of the PTFE cover. For the PTFE adhesive, you must replace the bottom sealing strip whenever you change the element. The adhesive serves as a barrier between the heating element and the sealer's body. When the sealer's heating element has burned through the bottom adhesive and arc'ed on the sealer's body, the element will break as well as destroy the timer. When you replace your adhesive, make sure the adhesive is 1/4"-1/2" past the machine on both ends to prevent the heating element from coming into contact with the sealer's body.